No Products in the Cart
This solar panel set adopts a new conversion method to double the working current of solar output with the same area and power.
The 2-way voltage output of solar energy is divided into 18v & 9v or 12V & 6V by shifting gears. Under the same area of power, the output current of the solar panel doubles, making it possible to charge cars, mobile phones, computers, and batteries in the same environment. Increased efficiency and doubled the charging speed.
The product is flexible and foldable can be attached to a smooth surface with a certain amplitude (such as the car roof).
Material: PET+Poly silicon cell
Waterproof rating: IP65
Solar energy conversion rate: 20%
NOCT(nominal operating cell temperature): 40-85°C
Max solar input:
12V battery,the highest 23V
24V battery when the highest 46V
Float charge: 18V/12V/9V/6V/5V (default,adjustable)
USB Output voltage:
DC output: 18V 3.81A
USB output: 5V 3.8A (max)
TYPE-C output: 5v 3.8A
1.Build-in industrial micro controller.
2.Fully 4-stage PWM charge management.
3.One-key setting,digital display, auto memory function.
4.Dual mosfet Reverse current protections, low heat productions.
5.Build-in short-circuit protections, open-circuit protections, reverse protections, over-load protections.
Low voltage charge: 18.8V
Float charge: 17.4V
USB output: 5V/3A
Discharge stop: 11.4V
Voltage: DC 12V/24V
Max solar input: <30V
Rated working current: ≤20A
Discharge reconnect: 10.2V
Working temperature: -35℃~60℃
Output voltage: 12V/24V automatically distinguish voltage
1*Foldable 100W Solar Panel with Accessories
1*Solar Panel Battery Charge Controller
1. Let the solar panel battery face with the sun, and the LED indicator of the output box turns red. Then the solar panel starts to work. USB outlet output 5.2v DC voltage, DC circular outlet output 18v direct charging voltage, (When you have to turn to block switch,H blocking DC output voltage 12v& 18V-L blocking DC output voltage of 6v& 9V.
2. This product is not recommended to charge the mobile phone directly. It should be used together with the charging bank, which can be used to charge the mobile phone, tablet computer and other electronic products.
3. Connect with the battery, connect the DC alligator clamp with the output DC voltage of 18v(20V when no load). Note: the positive and negative crocodile clips should not be connected or touched in use, which may cause short-line heating or burning.
4.If the product is equipped with a controller, it must be connected to the battery to work. Otherwise, the control is not displayed and it does not work.